Faculty of Engineering and Information Technology students and researchers have access to state-of-the-art facilities.
Bachelor of Engineering (Honours) Bachelor of International Studies (Honours) Diploma in Professional Engineering Practice
Note
This is an exit-only course. There is no direct admission to it. Current UTS students may be able to submit an Internal Course Transfer (Graduating) application to exit with this course. See the Course transfer page for further details.
This combined degree, offered jointly by UTS: Engineering and UTS: International Studies, links the Bachelor of Engineering (Honours) Diploma in Professional Engineering Practice (C09067) with the study of a language and culture other than English and the opportunity for students to study overseas for an academic year, pursuing a major research project in a field of their choice.
In the fourth year of the combined degree, International Honours students spend an academic year studying in the local language at a university in the country of their major and also complete an honours level research project under the supervision of a relevant UTS academic. Entry to the International Honours pathway is dependent on students maintaining a credit average (or higher) in both their International Studies and professional degree in their first three years of study, and on the availability of placements in particular majors.
The course allows students to complete the two qualifications of Bachelor of Engineering (Honours) Diploma in Professional Engineering Practice and Bachelor of International Studies in six-and-a-half years of full-time study. On completion, students receive separate testamurs for each award.
Course aims
The purpose of the program is to develop skills for leadership in the professional practice of engineering while at the same time providing an opportunity to acquire knowledge and understanding of another language and culture, intercultural awareness and engagement, resilience and adaptability, and stronger communication skills. It reflects a belief in the international character of engineering, and the conviction that Australian professionals can benefit from the early development of an international perspective and a fluency in cross-cultural interactions.
Course fees
For relevant fee information, please choose from the following:
Local student
All students at UTS pay tuition fees to contribute towards the cost of their studies.
In 2024 all offers made to domestic undergraduate students will be for Commonwealth Supported Places (CSP), which means that the Australian government makes a substantial contribution towards the cost of your education, and you pay the balance through student contributions.
The amount you pay depends on your area of study and the number of credit points (cp) in which you enrol. At UTS 48 credit points is considered to be one Equivalent Full Time Study Load (EFTSL).
The table to the right shows the amount a student can expect to pay for one year of full-time study (1.0 EFTSL).
Students can choose to pay their student contribution upfront, or if eligible, can defer their fees through HECS-HELP.
In addition to tuition fees, students are required to pay a Services and Amenities Fee (SSAF). The purchase of textbooks and other course materials may also result in additional cost.
You can calculate your student contribution as a percentage of the amounts shown on the table. Fee rates are divided into four bands covering broad discipline areas. It is important to note that a particular subject within a course may fall within a different band.
For example, if you are enrolled in a 6-credit point Architecture subject, your contribution would be 6/48 x $8,948 = $1,118.
Student contribution amounts for 2024 commencing students
| 2024 student contribution - Area of Study | Amount for 48 cp |
|---|---|
| Law, Accounting, Administration, Economics, Commerce, Communications and Society and Culture | $16,323 |
| Medicine, Dentistry and Veterinary Science | $12,720 |
| Allied Health, Other Health, Built Environment, Computing, Visual & Performing Arts, Professional Pathway Psychology, Professional Pathway Social Work, Engineering, Surveying, Environmental Studies, Science and Pathology | $8,948 |
| Education, Postgraduate Clinical Psychology, English, Mathematics, Statistics, Nursing or Foreign Languages and Agriculture | $4,445 |
International student
Tuition fees for international undergraduate students can be found using tuition fees search.
Tuition fees must be paid in advance each session and are subject to annual increase. Fees for future year(s) published in fees search, whilst unlikely to change, are estimates only. UTS makes every effort to provide up to date future year(s) fee estimates and to limit any changes, however, UTS reserves the right to vary fees for future year(s) at any time.
For this course, the cost per credit point for 2024 is $1021. The total credit points are 300.
All international students should familiarise themselves with the following documents:
- Protocol on refund of fees for international students - contains the refund of fees information for international students.
- Tuition Protection Service - designed to ensure that students receive the tuition they have paid for
In addition to tuition fees, students may be required to pay a Student Services and Amenities Fee (SSAF). Textbooks and other course materials will also result in additional costs.
UTS Alumni save 10%: alumni.uts.edu.au/advantage
For further information on costs related to your study at UTS, visit the international students' fees information page.
Careers
Career options depend on the major chosen. Options are enhanced by international experience, making students more marketable to prospective employers.
Course structure
Course structure explained
Students are required to complete 300 credit points, comprising 204 credit points in engineering and 96 credit points in international studies. The engineering component consists of core (42 credit points), major (field of practice) (114 credit points) and the professional engineering practice program (48 credit points).
Overseas study
International Honours students spend a full year at a relevant partner university where they complete an honours level research project.
Industrial training/professional practice
Students undertake a minimum of 48 weeks of professional engineering internship. Some students choose to take their first period of engineering internship overseas, during their second or third year of enrolment. Most take this first period in Australia. This course is also available without the Diploma in Professional Engineering Practice. For details, refer to the Bachelor of Engineering (Honours) Bachelor of International Studies (C09123).
Course completion requirements
| Requirement | Credit Points |
|---|---|
| STM90107 Core subjects (Engineering) | 42 |
| STM90993 Professional Engineering Practice Program subjects | 48 |
| CBK90905 Major choice (Engineering) | 114 |
| CBK92058 Country and Language choice (Honours) | 96 |
| Total | 300 |
Additional information
Course duration
The course duration is normally six-and-a-half years of full-time study, although it may be possible to complete the degree in less time than this.
The program involves four years of academic work in Australia, up to one year of academic work overseas where students spend two sessions of study at a university or other higher education institution in the country of their major, and two periods of professional engineering internship. The periods of engineering internship can be taken in Australia, or one in Australia and one overseas.
Full time, on campusInherent (essential) requirements
Inherent (essential) requirements are academic and non-academic requirements that are essential to the successful completion of a course.
Prospective and current students should carefully read the Inherent (Essential) Requirements Statement below, and consider whether they might experience challenges in successfully completing this course. This Statement should be read in conjunction with the UTS Student Rules.
In addition, students who enrol in professional degrees are required to comply with legal requirements relating to accreditation and registration.
Prospective or current students concerned about their ability to meet inherent (essential) requirements should discuss their concerns with the Academic Liaison Officer in their faculty or school and/or UTS Accessibility Service on 9514 1177 or at accessibility@uts.edu.au.
UTS will make reasonable adjustments to teaching and learning, assessment, professional experiences, course related work experience and other course activities to facilitate maximum participation by students with disabilities, carer responsibilities, and religious or cultural obligations in their courses.
For course specific information see the Faculty of Engineering & Information Technology Inherent (Essential) Requirements Statement.
For course specific information see the Bachelor of International Studies Diploma in Languages Inherent (Essential) Requirements Statement.
Assumed knowledge
There are no prior language requirements for the international studies program. During their first year of study students complete a language survey to ensure they commence their language and culture study at the appropriate level.
Year 12 adjustment factor scheme
To see a list of courses where HSC subjects provide adjustment factors, please refer to the Year 12 adjustment factors page.
Recognition of prior learning
Students who have previously undertaken relevant study at a recognised tertiary education institution may be eligible for recognition of prior learning (RPL) if the subjects completed are deemed by the faculty to be equivalent to subjects in the student's course. Subjects completed as part of a qualification in which study ceased no more than 10 years prior to the student's first semester in the relevant UTS Engineering degree may be considered. Limits apply to the number of credit points of RPL granted.
Professional recognition
The Bachelor of Engineering (Honours) Diploma in Professional Engineering Practice, majoring in Civil Engineering, Civil and Environmental Engineering, Electrical Engineering, Flexible Engineering, Mechanical Engineering, Mechanical and Mechatronic Engineering, or Mechatronic Engineering, is fully accredited by Engineers Australia at the level of Professional Engineer and is recognised internationally by signatories to the Washington Accord. Biomedical Engineering, Data Science Engineering, Electrical and Electronic Engineering, Electronic Engineering, and Software Engineering majors are provisionally accredited with Engineers Australia, pending full accreditation. UTS is currently seeking provisional accreditation of the Chemical Process Engineering and Renewable Energy Engineering majors.
Transfer between UTS courses
Students in the Bachelor of Engineering (Honours) (C09066) or Bachelor of Engineering (Honours) Diploma in Professional Engineering Practice (C09067) may transfer to this course after completing the first year (full-time equivalent) of their current course, subject to achieving a minimum weighted average mark of 65.
Students in this combined degree may transfer to the Bachelor of Engineering (Honours) Diploma in Professional Engineering Practice (C09067). International students may transfer to the Bachelor of Engineering (Honours) (C09066).
UTS: Handbook
See the Bachelor of Engineering (Honours) Bachelor of International Studies (Honours) Diploma in Professional Engineering Practice in the UTS: Handbook for comprehensive course details.
Information for international students
Find out about support services, the Australian education system, accommodation and more to help you get the most out of your study at UTS.
Domestic students
How to apply
This course is not available via direct entry. Current UTS students wishing to transfer may submit an Internal Course Transfer - Continuing application. To confirm eligibility, check with the UTS Student Centre.
Need more information?
International students
How to apply
This is an exit-only course. Current UTS students wishing to transfer may submit an Internal Course Transfer - Graduating application. To confirm eligibility, check with the UTS Student Centre.
